Rated 4.9 out of 5 by our customers

Rated 4.9 out of 5 by our customers

90 Day Risk Free Returns
Price Match Promise
5 Star Rated by Sailors
Over 70,000+ Orders Shipped
Fast Dispatch and 5 Star Customer Rated
Black Friday Sale: Over 900 Price Reductions Site Wide
The forestay runs from the mast to the bow and holds your mast up from the front. On many dinghies it does its most important work ashore and between races, when the jib is down and nothing else is supporting the rig, so it pays to keep it in good condition.
We stock forestays made to length for the Dart 18, Laser Bahia, Laser Vago and SB20, each with the correct end fittings for the class.
If your boat isn’t listed, we make custom length wire rigging to order in 3mm and 4mm 1x19 stainless steel wire. Send us the length of your existing forestay and we will make a replacement to match.
Replacing the rest of your standing rigging? See our Wire Shrouds, or explore all Boat Rigging.
August 12, 2026 6 min read
Read MoreSome frequently asked questions that other customers have asked us about Wire Forestays.
What does a forestay do?
A forestay is the wire that runs from the mast to the bow and holds the mast up from the front. It works with the shrouds to keep the rig standing. On many dinghies the jib halyard takes over the load once the jib is hoisted and tensioned, so the forestay’s main job is to support the mast when the jib is down.
When should I replace a wire forestay?
Replace a wire forestay as soon as you see a broken strand, a kink, or corrosion or cracking at the end fittings. Pay close attention to the top of the wire and to anywhere the jib or a furler rubs against it, as this is where wear starts. If the forestay fails with the jib down, the mast will fall backwards.
Can I order a forestay made to a custom length?
Yes, we make wire rigging to a custom length in 3mm and 4mm 1x19 stainless steel wire. Measure your old forestay from bearing point to bearing point, with the wire pulled straight, and order to that length. Custom wire is made to order, so allow for the lead time shown on the product page.
What is 1x19 wire and should I choose 3mm or 4mm?
1x19 wire is made from 19 single strands of stainless steel laid together, which makes it stiff and very low stretch, so it is the standard choice for standing rigging. As a guide, 3mm suits most dinghies and 4mm suits larger dinghies, catamarans and small keelboats. The safest approach is to match the diameter of the wire you are replacing.
Are forestays specific to each boat?
Yes, a forestay is made to the right length with the correct end fittings for each class. We stock forestays for the Dart 18, in long and short versions, along with the Laser Bahia, Laser Vago and SB20. If your class isn’t listed, our custom length wire rigging can be made to match your existing forestay.
Save up to 40% on your next order.